Rules, Guidelines, and How to Complete the Slam

The Official Slam Rules

1. Register before catching your Slam fish

Anglers should register for the Utah Cutthroat Slam before catching any fish intended to count toward the Slam. A new registration is required for each new Slam.

Registration is available through the Utah Division of Wildlife Resources or at participating license agents. The Slam registration fee is currently $20 for adults and $10 for youth under 18.

Slam registrations never expire, so do not feel pressured to complete the Slam within a limited amount of time. Take your time and enjoy the adventure.

Slam registration is separate from a Utah fishing license. You must also possess any fishing license or permit required by Utah law for the waters you are fishing.

2. Catch all four native Utah cutthroat species

You must catch one of each of the following:

• Bonneville Cutthroat Trout – Bonneville Basin in Utah
• Bear River Cutthroat Trout – Bear River drainage, including Bear Lake and its native tributaries in Utah
• Colorado River Cutthroat Trout – Colorado River and Green River drainages in Utah
• Yellowstone Cutthroat Trout – Snake River drainage in northwestern Utah

The fish must be caught within the subspecies’ historic native range to qualify.

Some of Utah’s cutthroat trout may reside outside of their native range, and therefore cannot be counted towards a Slam submission. See rule #5 below.

Before fishing, consult the Utah Cutthroat Slam maps and individual subspecies pages to determine whether your destination is within an eligible native range.

3. The fish must be a pure cutthroat

The Slam is intended to celebrate Utah’s native cutthroat trout subspecies.

Cutthroat trout + rainbow trout = hybrids called “cutbows” which do not qualify.

Cutthroat trout can vary dramatically in appearance depending on the water they inhabit. Color, spotting patterns and body shape are not always reliable indicators of subspecies.

When in doubt, consider:

• The presence and appearance of the characteristic cutthroat jaw slash
• Overall spotting patterns (cutthroat tend to have few, larger spots, unevenly distributed across the body)
• Fin coloration and spotting (cutthroat trout will never have white fin edges)
• Body coloration
• The known fish populations in the water you are fishing
• Whether the water is within the native range of the subspecies

Most importantly, the drainage where the fish was caught is the primary factor used to determine its subspecies. We cannot truly identify cutthroat subspecies from their looks alone, as there are limitless variations in phenotypic appearance, even among members of the same subspecies.

If you are uncertain about a fish, take a clear photograph and contact the Utah Cutthroat Slam before assuming it qualifies.

4. Special consideration: Weber River drainage

The Weber River drainage deserves special attention.

Because of historical interactions between Bear River and Bonneville cutthroat populations, cutthroat trout caught in the Weber River drainage may be counted toward either the Bear River or Bonneville Cutthroat requirement.

However:

A Weber River drainage fish can count for only ONE Slam requirement — not both.

For example:

• If you use a Weber River drainage fish as your Bonneville Cutthroat, you must catch your Bear River Cutthroat within the Bear River/Bear Lake drainage.
• If you use a Weber River drainage fish as your Bear River Cutthroat, you must catch your Bonneville Cutthroat in a different Bonneville Basin drainage.

You cannot submit two Weber drainage catches for both subspecies.

5. Certain stocked populations do not qualify

Not every cutthroat trout found in Utah is part of a native population.

The Slam recognizes fish caught within their historic native range, rather than simply anywhere that a particular subspecies has been stocked.

For example, cutthroat trout caught from Strawberry Reservoir, Scofield Reservoir, Panguitch Lake, and any of their tributaries cannot be counted toward the Slam, because these waters contain Bear Lake cutthroat that were introduced outside their historic native range for sportfishing purposes.

When planning your Slam, always check the current Utah Cutthroat Slam maps and the information pages for the individual subspecies.

6. Follow all Utah fishing regulations

The Utah Cutthroat Slam does not replace or modify Utah fishing regulations.

You are responsible for knowing and following the regulations that apply to the water you are fishing.

Regulations can vary from one water to another.

Always consult the current Utah Fishing Guidebook before your trip.

7. Photograph your catch

Each Slam fish must be photographed so that the catch can be verified.

Your photograph should clearly show the trout and enough of its identifying characteristics for Slam officials to determine that it is an eligible cutthroat trout.

A good Slam photograph should:

• Clearly show the entire fish whenever possible
• Display a visible cutthroat slash if possible (though this isn’t always necessary)
• Show enough of the body to evaluate spotting and coloration
• Be reasonably well lit and in focus
• Show the fish being supported or held carefully and naturally
• Avoid obscuring the fish with hands or equipment as much as possible

You do not need to take a perfect trophy shot. See adjacent photos for examples of good cutthroat photographs.

The purpose of the photograph is to document your catch, allow us to correctly identify the trout as a cutthroat, and still allow you to return the fish to the water quickly if catching and releasing.

When in doubt, take the picture. You can always delete it later. You cannot retake the picture after releasing the fish.

8. Consider releasing your fish

Cutthroat trout caught for the Slam are encouraged to be released, but it’s not necessary if waterbody’s regulations allow harvest. Always check the Utah Guidebook before your trip.

The goal of the Utah Cutthroat Slam is to celebrate and conserve Utah’s native cutthroat trout.

Handle every fish with the assumption that its survival matters.

Follow Utah’s fishing regulations, especially where catch and release is required. But be aware that in many of Utah’s waters, cutthroat harvest is allowed. Just be sure to follow Utah’s daily harvest limits according to the water you’re fishing. Be sure to check the Utah Fishing Regulations Guidebook.

Proper Trout Handling

Following a few simple practices can dramatically reduce stress and injury to native trout.

Keep Them Wet

Cutthroat trout are especially vulnerable to stress and handling.

Whenever possible:

• Keep the fish in the water while removing the hook.
• Keep your hands wet before touching the fish so you don’t remove their protective slime coat.
• Minimize the amount of time the fish spends out of the water.
• Return the fish to the water as quickly and gently as possible.

Since you need a picture for the Slam, have the camera ready before lifting the fish from the water.

A quick photograph can be taken without unnecessarily stressing the fish.

Photographing Your Fish

Taking a photograph is an important part of documenting your Slam — but the photograph should never come at the expense of the fish.

Before you lift the fish:

• Have your camera or phone ready.
• Decide where you want the fish positioned.
• Frame the shot.
• Keep the fish in the water until everything is ready.

Then:

• Gently support the fish with wet hands or lift the net
• Keep the fish close to the water.
• Take the photograph quickly.
• Return the fish to the water quickly if catching and releasing.

A good rule:

The fish should spend as little time out of the water as possible.

Whenever practical, photograph the fish partially submerged.

If you are taking a traditional “hero” photograph, hold the fish over the water rather than over rocks, dirt, a dock or the floor of a boat.

That way, if the fish slips, it falls into water instead of onto a hard surface.

Get close

Keep in mind that we use the photos to identify if your submission is actually a cutthroat, so don’t have the fish be too far away from the camera.

Trout Handling Tips

Land Fish Quickly

Prolonged fights can unnecessarily exhaust trout, particularly in warm water or low-oxygen conditions. So be sure to land cutthroat quickly so they can be released quicker.

Consider barbless hooks

Barbless hooks are easier and faster to remove and can reduce handling time and injury to the trout, and possibly to yourself!

Wet your hands

Always wet your hands before handling a trout.

Dry hands can remove the fish’s protective slime coat, which helps protect it from pathogens and infection.

Never squeeze the fish

Support the fish gently rather than gripping it tightly. A rubber net can help with landing the fish without having to grip it.

Avoid putting pressure on the belly or internal organs.

Keep your fingers away from the gills

Never place fingers inside or through the gill cavity or grip a fish by its gill covers.

Keep the fish in the water

Whenever possible, complete the entire unhooking process while the fish remains submerged.

If the hook is deeply embedded, cut the line

If the fish swallows the hook or if it is embedded in the soft tissue at the back of the throat,  cutting the line and leaving the hook in place will give the fish a better chance of survival.

Revive exhausted fish

If a fish appears exhausted after the fight, gently hold it upright in the water and allow it to recover.

Do not move the fish aggressively back and forth through the water.

Allow it to regain its strength and swim away under its own power.

What Information Should I Record?

Once you’ve caught all four required cutthroat, click the link below for the Slam Completion Form.

Do not submit your info and a photo after each catch, wait until all four cutthroat subspecies have been caught before submitting the form.